Your resource of foundation repair information and local contractors.

Need Info or Local Contractor? Call Us: 309-944-7296

AFFILIATIONS

What is Anchor Foundation Repair and When is it Used?

clock March 16, 2015 07:01 by author
My Foundation Repairs uses ECP products for foundation repair. These products are the very best in the industry.

What is Anchor Foundation Repair and When is it Used?

A foundation may need repaired if you have cracks in your foundation, windows and doors that do not close or fully lock, stair step cracks in brick lines, or the seperation of caulk from the edges of windows and doors.

 

Soil and base types are very diverse.  Soils range from shallow clay, weathered and dry, to the hearty deep soils.   These soils vary including water holding capacity, acidity, depth and nutrient status. All of these properties can influence the potential for successful foundations.  My Foundation Repairs will review your foundational issues and choose the proper repair tools for your specific needs.

 

There is a wide range of options for foundation repair.  My Foundation Repairs has a skilled staff to review your particular issue and offer the best solution at the most reasonable price.  Business owners and homeowners should be aware of the signs that they may have a problem with their foundation. Some of these signs are:  

  • Stair cracks
  • Leaning chimney
  • Sticking doors and windows
  • Cracks in walls
  • Cracks in floors
  • Drywall cracks
  • Stoop and porch settlement

 My Foundation Repairs uses only top grade, quality repair tools made by Earth Contact Products (ECP).  ECP repair parts made right here in the United States of America to ensure quality craftsmanship.

 

 

What are my options for repair?

 There are several time tested repair techniques used by My Foundation Repairs:

 

Heavy-duty steel push piers are used to permanently lift your home back to its original position. These piers are driven into the ground and the weight of the structure is shifted from weaker soils and distributed onto theWall repair using wall plate anchors steel piers. The piers is an end-bearing pier that does not rely upon nor require skin friction to produce support.  The advantages to using a push pier system is portable equipment allows for installation in smaller areas, such as crawlspaces.  They are load tested during the installation process, they allow for lifting of settled structures, and are corrosion protected.

 

Helical piers are used for the stabilization of foundations where there are smaller buildings or homes, unstable rock basement or very deep load bearing layers. Helical piers are used where there is a need to resist a tension or compressible force or both.   A helical pier is a steel shaft, similar to a large screw that provides support for a wide variety of structures. Helical piers are often used when soil conditions do not allow for a traditional foundation system.

 

Helical tiebacks are used to stabilize bowing basement walls. The most common reason for bowing walls is water pressure.  It can push the walls upwards (hydro-static pressure) or push laterally against a wall, especially in the colder climates.  These wall plate anchors called Helical tiebacks consist of an inside wall plate, an outside anchor and a high strength rod that ties them together. Wall anchors are the most cost-effective method for providing stabilization of bowed walls that have been affected by water and/or hydro-static pressure.



Pier and Beam Foundation Repair

clock February 11, 2015 09:38 by author

Pier and Beam Foundation Repair

If you have pier or beam issues in your home, it could mean that you are having foundation problems and the foundation is not doing the job that it is supposed to do which is to support the weight evenly to the beams and piers. There are several signs that you may be having a foundation that has settled or is unlevel. Some of the signs that you may be having a foundation problem are:

  • Sloping floors
  • Leaning chimney
  • Doors and windows that stick
  • Floor cracks
  • Wall cracks
  • Ceiling cracks
  • Shimming between piers and beams
  • Bowing walls

 

Failing foundations are usually caused by the soil beneath the foundation. If the soil was not compacted properly during the building of the home, this will cause the soil to be loose and move beneath the foundation. Also if the soil is expansive soil which means that it will heave when wet and shirink when dry, this constant movement of the soil will cause the foundation to move and shift. The shifting soil will also cause voids beneath the foundation causing the foundation to sink into the voids. 

If you see any signs that indicate that you may have a foundation problem, it is important to have an experienced foundation repair contractors come and inspect your foundation. My Foundation Repairs has specialized contractors that can come and inspect your home and offer you the foundation repair solutions that you may need. These contractors use only the best foundation repair products on the market today. They are manufactured by Earth Contact Products (ECP), the very best in underpinning products in the industry.

Foundation Repair Solutions

My Foundadtion Repairs contractors can lift and stabilize your foundation using underpinning products such as steel piers and helical piers. These piers are driven deep into the ground through the unstable soil until they reach a more solid soil layer.

Steel Piers

ECP steel push piers are sometimes referrs to as micro piles or resistance piers. The patentented ECP steel piers are the standard for all piering method for foundation repair and are the choice for the contractors at My Foundation Repairs. 

ECP helical piers look like large screws that are individually installed into the ground and then load tested. After load testing the entire weight of the structure is lifted onto the piers to level and stabilize the structure. These ECP helical piers have many advantages such as:

  • Little to no vibration
  • Can be installed in any weather conditions
  • Immediately load transfer after installation
  • Installs below active soils
  • Easily load tested to verify capacity

If you are in need of pier and beam foundation repair, let the professionals at My Foundation Repairs offer you the ost effective repair solutions for your needs. When you contact us, we will send the most qualified contractor to help you with your repair needs. Contact My Foundation Repairs today.



Understanding Piering Products

clock October 22, 2013 10:11 by author
Helical anchors and steel push piers can be used to repair settling or sinking foundations.

Foundation Underpinning Products

For homeowners, a sinking or settling foundation can be a frightening issue. If your foundation is settling, it could cause various problems to arise throughout the home. These problems include cracks in your floor, walls, or ceiling, bowing or leaning walls, uneven or sloped floors, sticking doors and windows, and more. These can be dangerous issues for you and your family. If you notice any of these common problems, contact a foundation repair contractor immediately to have the problem taken care of. My Foundation Repairs can help connect you to a professional foundation repair specialist in your area.

The most effective way to repair a sinking or settling foundation is with a process called underpinning. Underpinning is the use of a pier or anchor driven into the ground to stabilize the foundation. These piers minimize stress to keep your foundation sturdy and close any cracks that may have formed. There are a few different types of piers - each have certain advantages, and it is good to examine all of your options before deciding which is the best solution for you.

Piering Solutions for Settling Foundations

The first, most common type of pier is the steel push pier. These steel piers, also known as resistance piers or steel piles, are a great option for foundation problems that arise from poor soil compaction, soil shrinkage, erosion, or improper footer embedment. Unlike concrete piers, steel push piers are end-bearing piers and do not rely on skin friction to provide support. During the installation process, they are individually load tested to ensure safety. They are driven into stable soil beneath your sinking foundation, and the weight of the structure is transferred onto the pier so that it can be lifted back to it's original level.

The next type of pier is a helical pier. Helical piers work in much the same way as steel push piers. The main difference is that instead of merely being driven into the ground, helical piers are screwed in to provide even more support. Once they have been screwed into the stable soil under the layer of active, shifting soil beneath your foundation, the structure's weight is transferred onto them and it is raised to it's original position. Helical piers are reliable enough to support your home for a long time to come. They also have a high load bearing capacity, making them the ideal choice to support your home. Helical piers can also be used in new construction instead of old fashioned concrete piers; this will help protect your home against future foundation problems. Also, helical piers are easy and quick to install in any type of weather, meaning that they are an efficient choice for your foundation repair needs.

Other types of underpinning and piering products include slab piers, resistance piers, and micropiles, all of which work in a similar fashion to steel push piers and helical piers. ECP (Earth Contact Products) offers reliable piering products for any foundation repair situation. If you notice the symptoms of a sinking or settling foundation, do not hesitate - let My Foundation Repairs help you get in contact with a professional foundation repair contractor right away!



FIND A CONTRACTOR IN YOUR AREA

CHOOSE STATE:

Month List

Sign in


Go Back to MyFoundationRepairs.com    RSS comment feed RSS