A high-quality sump pump system is designed to remove water from around and under your home. One of the often overlooked but key ingredients to a quality sump pump system is the basin or pit liner. The design of the sump pit will greatly affect the efficiency and effectiveness of the sump pump system. No longer do you have to settle for a glorified trash can in your basement floor. Quality sealed sump pits are available through our national network of quality basement waterproofing contractors.
The first thing you need to look at is the shape of the sump pit. The unique bell shape of our pit, above left, allows for a greater amount of water to gather at the inlet of the sump pump system. This design causes the sump pump to run 40% less often and more efficiently. Your sump pump will run less often and allow more water to be removed when it is turned on, effectively increasing the life of your sump pump system. Remember, your sump basin needs to be large enough to easily add an extra sump pump or battery backup sump pump. If the basin is not wide enough at the base there will not be enough room for water to collect because of too much equipment being placed in the bottom of the pit.
Following the shape, you will see that some sump basins will have perforated holes around the perimeter and some will not. The design of the whole basement waterproofing system will dictate whether or not perforations are needed. In many clay soils, the perforations will help remove water from under the slab. In sandy soils, perforations can cause clogging of the sump pump system.
The next feature to look for is a sealed, airtight, moisture-proof lid. The lid or cover is a very important piece to a quality sump basin or sealed waterproofing system. There are several reasons to cover your pit with a lid. First, for safety concerns. With children and pets around you want to keep the sump pit covered to prevent someone or something from falling in the pit. Next, an airtight lid will prevent moisture and soil gases from entering the living space. The main purpose of a sump basin is to remove water from the home, so keeping the water in the sump pump basin by using a sealed sump pit lid is necessary. One unique benefit of our sump basin lids is the ability to see through them. Clear, sump pit lids allow you to see into the sump pit and make sure that everything is operating properly. These lids will have a gasket seal surrounding the perimeter which helps fight against noise and prevents moisture from entering the living space while allowing you to observe its functions.
Sump basins are not all built alike. Take your time and evaluate the basin before you decide which type to install. Many of us have “builders grade” basins, which are nothing more than glorified trash cans, installed in our homes. If you have basement water problems one of the first upgrades that should be made is a sealed sump basin or pit. A quality basin along with a battery backup sump pump can go a long way towards fixing basement water issues.
For more information, contact us for a free waterproofing estimate today!
Our qualified basement waterproofing professionals can now provide special financing options upon providing your free in-home estimate. Let My Foundation Repairs help you get in touch with a local Earth Contact Products contractor today!